Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

Using bidir pins to chain PLLs in Cyclone II

Is it possible to chain two PLLs in Cyclone II devices using an I/O pad? The idea would be to define one of the inputs of the slave PLL as bidirectional. Then route the output of the master PLL...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

Oh, I see it is not possible. All the PLL inputs are dedicated pins :(