Forum Discussion

晓郝's avatar
晓郝
Icon for New Contributor rankNew Contributor
7 years ago

Unable to establish a link of RapidIO

When I use RapidIO in Arria 10 to communicate with DSP , I find port_initialized of IP core is high , but the port_ok of the port 0 error and status CSR-offset:0x158 is low. According to RapidIO Gen1...
Nathan_R_Intel's avatar
Nathan_R_Intel
Icon for Contributor rankContributor
7 years ago
Hie, Can you help clarify if your design is unable to establish a link although CSR 0x158 = 0 and port_initalized goes HI? Regards, Nathan
晓郝's avatar
晓郝
Icon for New Contributor rankNew Contributor
7 years ago

Hi,

When DSP complete the initialization, the port_initialized of FPGA IP core is high, but CSR 0x158 = 1 ,

the PORT_UNINIT of this register is 1, the PORT_OK of this register is 0 . Besides I find the

no_sync_indicator is 1. What maybe bring on unable to establish a link.

Tah