Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorTiming problems, Help
Hi, I designed a cordic block that has a fmax of 200 Mhz and I have a 18 bits counter that provides the angle for cordic block, this counter has a fmax of 210 Mhz. Here I don't have problems, but whe...
Altera_ForumHonored Contributor
Honored Contributoruhhmmmm...
fmax of cordic block = 200Mhz fmax of 18 bits counter = 210Mhz cordic + counter = 40 Mhz (when they are connected) and I need 150Mhz !!!! <--- This is the problem
