Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Stratix V full reconfiguration only works conditionally

On my Stratix V board, the ability to do a full reconfiguration of the device by asserting !nCONFIG is dependent on the state of the device. I have never seen this before, nor seen it documented. ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Do you have an Altera Stratix V development kit that you can reproduce this test on? (I don't have one, so cannot do it for you, sorry)

If you reproduce the issue on an Altera kit, then you can file a service request along with the procedure required to regenerate the issue. I've found the support pretty good if I ask the questions with enough detail.

Cheers,

Dave