Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorStratix V full reconfiguration only works conditionally
On my Stratix V board, the ability to do a full reconfiguration of the device by asserting !nCONFIG is dependent on the state of the device. I have never seen this before, nor seen it documented. ...
Altera_ForumHonored Contributor
Honored Contributoranother test sequence and results:
erase flash convert A.sof to A.flash load A.sof via JTAG program A.flash into EPCQ with nios2-flash-programmer reconfig - fail powerup - success reconfig - success reconfig - success verify A.flash with nios2-flash-programmer reconfig - fail load A.sof via JTAG reconfig - fail powerup - success verify A.flash with nios2-flash-programmer do NOT attempt reconfig load A.sof via JTAG reconfig - success :confused:
