Forum Discussion

Honored Contributor

9 years ago

Si5338 in Cyclone V GX Starter Kit

Hello, I have been trying to figure out how to program the Si5338C that is used as a clock generator for the Cyclone V GX starter kit. Basically I need two different clocks with frequencies of 125...

Altera_Forum

Honored Contributor

9 years ago

--- Quote Start ---

Altera don't have their own I2C IP but have partners who offer it. Try microtronix (https://www.altera.com/products/reference-designs/all-reference-designs/industrial/ref-i2c.html) or, better still, write your own (I would).

--- Quote End ---

FYI, the OpenCores I2C component generally works OK, if you can accept the license.

http://www.alterawiki.com/wiki/i2c_(opencores)

Forum Discussion

Si5338 in Cyclone V GX Starter Kit

Recent Discussions

Cyclone-V SCFIFO - adding ECC to M10K/MLAB/Auto memory

Will serialization factor of 6 in LVDS serdes IP be supported in the future on Agilex5?

System PLL of Agliex5 PCIE example design cannot be locked after configuration

JTAG Chain Broken on Agilex 7-I Dev Kit

Request for Cyclone V Pinout File Information