Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Problems with generating a flash file with elf2flash

I seem to be having issues using the Flash programmer to burn my elf and sof file into flash so it can boot from this location. I have a couple of questions. I have read and followed the documentat...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Culleyd,

Once i set my reset vector correctly in quartus, the flash command worked. I opened the flash programmer from the nios II eclipse. I created a new project using my sopcinfo file. I then added my elf file. and selected start. It is working.