Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

problem with Uniphy DDR3 pin planning

Hi , i have a problem with doing pin assignment on pin planner for startix IV GX EP4GX530NF45c3 . i looked out the design example and tried to work with that by changing the device name as well ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Hi all,

I have the same problem with "DDR2 SDRAM High Performance Controller II" on the Startix IV EP4SE230F29.

My specific error is:

Error: Can't place DQ I/O "mem_dq_to_and_from_the_ddr2_controller_high_perf[5]" to I/O location Pin_AB25 because its memory interface I/O group cannot be placed

Error: Can't place stratixiv_io_pad "mem_dq_to_and_from_the_ddr2_controller_high_perf[5]" to location "PIN AB25".

Does anybody know how to solve this problem?

Thanks

Luca