Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Problem with JTAG indirect

I am trying to configure a EPCS1 through JTAG indirect. I receive the following message, which is as cryptic as the help. [h=3]Serial Flash Loader Active Serial Memory Interface on device...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Just for those who may end up with the same error. The configuration all have weak pullup resistors, and I had 10K to ground for the nCE. Changed it to ten ohms and my problem disappeared. Wish they had better comments for there error messages.