Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

PLL compensation mode

I understand that the PLL compensation mode is only for the purpose of aligning the input and output edges. Then it means that if the input clock is not used directly, then it is better to specify "n...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

I read somewhere that "no compensation" mode is the best to minimize the output jitter, because the Quartus II optimize the parameter inside the PLL without taking care about the output phase.