Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorOpenCores 10/100 MAC reports InvalidSymbol
I've built a system with the opencore ethernet MAC connected to the PHY port# 5 of the integrated switch KS8995MA. I can successfully send packets but received packets are reported by the MAC with...
Altera_ForumHonored Contributor
Honored ContributorOk, thanks for your reply.
I finally decided to switch to the TSE that I use in 10/100 mode only. The board had a hardware issue (RX_ERR was not connected) that make me loose a lot of time, but it works now.
