Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

nios2-terminal and jtag

Hello all, I am running Nios2 on Ubuntu 12LTS and I have received the following error when trying to run nios2-terminal: $ sudo bash ./nios2-terminal ./nios2-terminal-wrapped: error while ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Finally solve the problem...

It works after I perform the following cut and paste at /etc/udev/rules.d/51-usbblaster.rules

# USB-Blaster

SUBSYSTEM=="usb", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6001", GROUP="blaster"

SUBSYSTEM=="usb", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6002", GROUP="blaster"

SUBSYSTEM=="usb", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6003", GROUP="blaster"

# USB-Blaster II

SUBSYSTEM=="usb", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6010", GROUP="blaster"

SUBSYSTEM=="usb", ATTR{idVendor}=="09fb", ATTR{idProduct}=="6810", GROUP="blaster"

# BeMicro

SUBSYSTEM=="usb", ATTR{idVendor}=="0403", ATTR{idProduct}=="a4a0", GROUP="blaster"

I received this info from: http://www.alterawiki.com/wiki/quartus_for_debian_wheezy