I am using Lucid Lynx an the altera 8.1 toolchain. The totaly toolchain worked pretty good when I set it up. But then I got the problem with:
"There are no Nios II CPUs with debug modules available which match the values
specified. Please check that your PLD is correctly configured, downloading a
new SOF file if necessary."
It also doenst help to create a new project and it also doesnt help to delte all file except:
in the quartus design dir.
Its really strange. Because it also doesnt work to auto detect after I program the target with the standard stratixIII_3sl150_dev_pfl.sof file from altera. It just returns me an empty target.
Looks like the USB connection only works one-way.
btw.
When I run this script at start up:# !/bin/sh
sudo mount --bind /dev/bus /proc/bus
sudo ln -s /sys/kernel/debug/usb/devices /proc/bus/usb/devices
sudo /opt/altera8.1/quartus/bin/jtagd
sudo /opt/altera8.1/quartus/bin/jtagconfig
read -p "Press enter to finish"
(Sometimes) I have to kill a jtagd process before. But the jtagd process ist not running after running the script.
Where is my problem? Can somebody help me?
PS: Even if I flash the correct design under windows it doesnt help(Not possible to download elf files)
PPS: Take a look into the zip file to get an screenshot from the terminal
PPS: I think that the USB-Blaster gets detected but not the FPGA Chip
Honored Contributor
