Forum Discussion
New ContributorNeed Cyclone V SoC in SE series
Hi All,
I am looking for a Cyclone V SoC in SE series with below specifications:
-Minimum number of FPGA logic elements
-Minimum speed grade of 7
-With no hard PCIe or hard memory controller
-Used for commercial purpose
-Single core
-Package type either FPGA or UBGA whichever has 1mm pitch
-Standard power and Lead-free packaging
The suggested part must be RoHS compliant and regularly available in the market. EoL around 7 years can be helpful. Also, kindly suggest an eval board for the part.
6 Replies
Lakshu_05Hi,
Awaiting your reply. Requesting your response ASAP.
NazrulNaim_IntelRegular Contributor
Hello,
Sorry for the delay, for your request. The suggestion for the above specification is Cyclone® V 5CSEA2 FPGA .
Hope that answers your question.
Best regards,
Nazrul Naim
- Lakshu_05
Hi Nazrul,
Thanks for replying.
Requesting you to provide full part number along with Eval Board availability information.
- Lakshu_05
Hi Nazrul,
Am planning to use 5CSEBA2U23C7SN part in my design. Could you confirm whether the part has sufficient stock, EoL and RoHS Compliance?
- NazrulNaim_Intel
Hello,
For your information, 5CSEBA2U23C7SN is ROHs compliant and the next EOL review will be in 2035.
Hope that answers your question.
Best regards,
Nazrul Naim
- NazrulNaim_Intel
Hi,
As we do not receive any response from you on the previous question/reply/answer that we have provided, for now I will set this case to Close-Pending.
Regards,
Nazrul Naim
