Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

May I use max-ii device in this way(Power related problem)

1. Power for VCCINT and some bank are applied at first while other bank has no power. Power for other bank are applied at a later time? 2. Apply different VCCIO voltage as the voltage specified in...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

thanks!

i have read the handbook, i think it's possible to Question 1, as long as I can accept the device don't enter user mode while some bank has no power.

what about question 2: if i set some pin to 1.8V in quartus, and apply 3.3V to VCCIO, will that pin work as a 3.3V LVTTL pin?