Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

May I use max-ii device in this way(Power related problem)

1. Power for VCCINT and some bank are applied at first while other bank has no power. Power for other bank are applied at a later time? 2. Apply different VCCIO voltage as the voltage specified in...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Review the MAX II Device Handbook, particularly chapter 4 hot socketing and power-on reset in max ii devices

--- Quote Start ---

All VCCINT and VCCIO pins of all banks must be powered on MAX II devices before

entering user mode.

--- Quote End ---