Forum Discussion

cjamcki's avatar
cjamcki
Icon for New Contributor rankNew Contributor
2 years ago

MAX10DD devices seem to not support ADC Blocks ?!?

we have a design targeting 10M50DDF256I7G. The device overview claims to support analog features as well as RSU, and some special flash access (not sure what that is but whatever). However, in Qsys...
Fpga Devkit
cjamcki's avatar
cjamcki
Icon for New Contributor rankNew Contributor
2 years ago

this really shouldn't be a difficult question to answer. i see only two options:

1. the "DD" variant does not not support ADC (documentation error)

2. it does support it but there's a bug in Quartus/Platform Designer.

we were hoping to take advantage of the flash options of the "DD" version, but we intend to use the ADC as well.

we are getting close to ordering components for our program for prototype PCBs, so we really need to know the answer. If it is, the first above, we will just switch to the "DA" flavor and forgo the flash benefits.

if it is the second choice above, we would need to know when a patch or variable setting or whatever would be available. if it is too far in the future, we'd likely switch to the DA part as well.