Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

MAX10 with NIOS does not start program code

Hi All, I have a very peculiar issue. I have a MAX10 10M08SCE144 with a NIOS core that I am trying to get to run at reset. So I got hold of AN730 which describes how to make sure the device i...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Hi deBoogle,

I believe there is a documentation error on AN730 for Advanced.hal.linker Settings for Boot Option 2.

Please try again by enabling allow_code_at_reset and leave other settings unchecked.

Regards,

CH