Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

MAX10 Bank voltages

Hi All, I am debugging PCBs containing a design using the MAX10x50SCE144. All the banks except 5 & 6 run at 3.3V and banks 5 & 6 run at 2.5V for receiving SUB-LVDS signals. Accordingly I have...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

I had a similar problem that resulted from connecting Bank 1A to 3.3V and Bank 1B to 2.5V. They are connected internally so 2.5V got pulled up to 3.3V. Sounds like your situation is different, but maybe this gives a clue.