Forum Discussion

RDick's avatar
RDick
Icon for New Contributor rankNew Contributor
7 years ago

Max 10 Configure Single Image

I would like to configure a single Max 10 image and leave the other image intact. I found a post on this forum that discusses how to configure a single image in the Max 10. The Intel guy suggested us...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
7 years ago

Hi,

You can use the sector erase. When you initiate the IP, you will observed the sector ID indicated and you will need to follow the ID to erase the image you would like to erase.

For example if you enable all the UFM and CFM on the IP for dual compress image design:

  • Sector 1 and 2 will be UFM
  • Sector 3 and 4 will be CFM for Image 2
  • Sector 5 will be CFM for Image 1.

So you just erase the Sector 5 if you would like to update Image 1.