Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

JTAG- USB byteblaster programming cable

Dear sir, We plan to connect all the devices in JTAG chain (please find the document attached) in a board. When programming cyclone-IV FPGA using JTAG interface using USB byteblaster, do we ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Hi, currently my company use MAx II plus programmer just for programing these devices. We already have have the generated files. All we do with our returned unit is reprogram using maxII plus. The issue is that the system we do it has windows 95 with max II plus version 10.1 using a byte blaster MV. So it works so far but the idea is to move to a newer operating system , and as byteblaster MV is not supported any more, purchase a USB-Byteblaster and if possibele use a newer version of maX II plus which has an harware option of usb-blaster a sthe jtag pins are the same. Seems like what i gather from ur suggestion is that no max II plus version is out there to do that and use Quartus Stand-Alone Programmer. Please let me know if i understand this right. I am new at this project and slightly cluelsee and have to support these really OLD units.