Forum Discussion

DPond's avatar
DPond
Icon for New Contributor rankNew Contributor
7 years ago

Issue programming 2 MAX 10 devices over JTAG using STAPL software.

I have a board with 2 x 10M04DCF256 devices on it. The JTAG chain is wired up serially (TDO from device 1 goes to TDI of device 2). The chain is fully functional. Here is the observed behavior: ...
ShafiqY_Intel's avatar
ShafiqY_Intel
Icon for Frequent Contributor rankFrequent Contributor
7 years ago

Hi Dpond,

I think this one is known issue (JAM/JBC file generation).

The issue is caused by Quartus Prime update version.

We will update the new KDB for this issue in near future. And this bug is scheduled to be fixed in a future release of the Intel Quartus Prime software.

In the meantime, please refer to the attachment picture for workaround:

I hope this will help

Thanks.😉