Forum Discussion

NKuma10's avatar
NKuma10
Icon for New Contributor rankNew Contributor
5 years ago

ISP clamp

Hi, We are using MAX 10 FPGA "10M40DAF484C7G" device in our project. Chip select for the Board management controller(AST 2600) is routed through this device which connects to the flash. As a result ...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


Just to clarify, what is a CS pin on MAX10?


Thank You


  • NKuma10's avatar
    NKuma10
    Icon for New Contributor rankNew Contributor
    5 years ago

    Hi YuanLi,

    Chip select(CS) of Board management controller to access its flash memory through SPI interface is an output pin of the MAX10 FPGA.

    Regards

    Naveen