Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

I/O Pin Assignments

I'm not completely sure how to do pin assignments. Let's say I want to assign Input to an onboard switch and output to the LEDs. I know that I am supposed to use the Pinout table for my FPGA (Stratix...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

Check out the board reference manual or board schematic and see which FPGA pins are connected to the switch and LEDs. Open assignment editor in Quartus II and assign those pins to the switch input and LED outputs of your design.