Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Interfacing Cyclone IV FPGA with Marvell PHY 88E1111 using SGMII

Hi I am using the cyclone IV with SGMII interfaced with Marvell PHY 88E1111. So what are the registers to be configured in the phy and how can I configure it for SGMII.
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Hi i am using our own custom board so how can i configure the fresh marvell ic 88E1111 but i am stuck in configuring through mac. i dont know which are the registers to be configured for sgmii interface in 88E1111 through MDIO and is there any idea to configure the phy.