Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

Implementing a table

Hello all, I'm trying to implement a table with stored switching angles for an inverter on to an FPGA. I'm a beginner so I'm having a lot of trouble figuring this out so please bare with me. H...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

The clock will be a device on the board, not inside the FPGA.

Assuming its a standard altera/terasic dev board, the reference manual should tell you what clocks are on the board and what pins they are connected to on the FPGA.