Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

I2C Problem on CIII DSP Board

The board is a CIII EP3C120F780C7 It has two High Speed Mezz Connector (HSMC) ports which I plan to use as follows: HSMC_A: Bitec Camera (For receiving a video signal) HSMC_B: Bitec Quad Video...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

I believe I figured it out.

I set 2 i2c masters in the SoPC Builder. This lets me communicate to either device.