Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

how to use cyclone's on-chip-memory?

In my design, I need a 4 ports RAM. The input/output ports are below: module ram(data1,waddress1,data2,waddress2,wena,clk,raddress1,raddress2,rena,q1,q2); input clk,wena,rena; inpu...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

I actually need two reads and two writes to separate addresses on the same clock.

THANKS FOR YOUR REPLY!