Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

How to program EPCQ4ASI8N for an old Cyclone FPGA

Hi, Is there a way I can program a EPCQ4ASI8N to work with Cyclone I? I have to keep some products which still use Cyclone I FPGA with EPCS4SI8N. Due to EPCS4SI8N discontinuation, ...
john_lee's avatar
john_lee
Icon for New Contributor rankNew Contributor
7 years ago

Hi,

Based my experience and knowlegde, you can just migrate EPCS to EPCQ-A. in Quartus 10.1, you can just create .pof file.

Just set EPCQ device when converting to .pof in Quartus 10.1. Then, you should able to program this .pof into programmer 17.1.

Hope this help you.. please like my comment if it working (it should be working.. I test it before)

Thanks..