Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

How to Program Cyclone V SoC Dev Kit EPCQ256

I am looking for directions on how to program the EPCQ256 device on the Cyclone V SoC Dev Kit Board. I tried to accomplish this by generating a jic programming file and use the quartus programmer to ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

MSEL[4..0]10010 Fast AS Mode can work well, as x 1 is lower speed configuration mode. if choose this ,after power on, the fpga configuration will not influence the HPS boot. if x4,it will influence it.