Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorHow to get 45Mhz clock out?
Hi dears: I am using ArriaGX devices, and the board's clock is 100Mhz which is input to the FPGA. And the system need a 45MHz clock, could you have any method to generate this clock through FPG...
Altera_ForumHonored Contributor
Honored ContributorNo, we are talking about one clock domain. The 100Mhz will clock all the registers conditioned on clken to slow it down to 45MHz rate.
There is no need for fifos since we are not talking about two clocks.
