Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Help me with the code??

I AM A NEWBIE IN VERILOG AND JUST DONT KNOW WHAT IS WRONG WITH MY CODE. THIS IS THE CRAZY SIMPLE QUESTION : Develop a Verilog model for a thermostat that has two 8-bit unsigned binary input...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

I tink the simulatin is OK now.But i need to assign inputs and outputs to pin planner coz need to display it on DE-series board .If v see the simulation, when i first enter the value for enableactual heater on become 1.Then i entered value of enabletarget and the final output is cooler on.The final output is ok bcoz i wanna cooler to be on.

My question is can i hold the heater_on output from on bcoz everytime i enter the actual target the heater must be on first. i JUST wanna final result to be displayed on the board.