Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorhelp for driving ccd imgae sensor with 5v output
Thanks for reply. i want to design ccd image acquisition system.In my design ,i took Kodak KAI-1020 sensor and altera cycloneii FPGA. cycloneii fpga produces ccd drive signals. But proble...
Altera_ForumHonored Contributor
Honored Contributor --- Quote Start --- The FPGA cannot provide a 5V drive signal, you will need to insert a buffer between the FPGA and the CCD. --- Quote End --- thanks for your reply .In the kai-1020 handbook,it use 74a04 as a buffer .But the reference design it use lattice isp1032e chip.
