Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

FPGA fried?

Hi, I am using a cyclone iii on a custom board I made and I am trying to make sure the fpga section of the board is functional. When I program the fpga, I get the "100% successful" message from...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

It might be worth checking the state of the nStatus and Config_Done pins after programming. Even though Quartus thinks everything is OK, something may still be amiss.