Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Flash programmer select file FAILs

From NIOS II IDE I select NIOS II Flash Programmer. Then select File, new and with the BSP Settings file radio button selected try to browse for my settings.bsp file ...... BUT ...... When pushing th...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

solution found ...

Turns out that if copying a settings.bsp file to the Desktop (as requsted by the tools only option) I could manage to program my FLASH with new SW from the Flash Programmer. During this process it also demanded having the *.sopcinfo file in a directory just below C:\ (which was granted) far from where my project files are.

But after finishing this process the tool allows me to browse to any directory !!!??? Seems that without any initial file path - no path could be selected. I suspect a version (10.1. SP1) bug here !?

Anyway - my HW/SW images are now dowloaded to flash and my project starts at power-on.