Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorEPCQ, Stratix V and Nios Flash Programmer issue
I have a custom Stratix V design with EPCQ256 connected in x4 mode. I can program the EPCQ through the FPGA with Quartus Programmer, but can't use the Nios Flash Programmer. My epcq ip core i...
Altera_ForumHonored Contributor
Honored ContributorI have created a small reference design for my board that does work. It doesn't have all the peripherals and clock domain crossings of my full design, and runs at 50 MHz rather than 100 MHz. All the fitter and assembler settings are the same between the designs.
