Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Dumping Memory Content

Hi everyone, Is there a nice and easy way to dump a memory module content to the PC (like into a file). Say I have an SDRAM or an SRAM and I wanna have their content dumped. Thanks.
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Hi,

Assuming you are using SOPC builder, I think you can easily do it using the 'system-console', a new Altera tool available since Quartus 8.0. Be aware that you have to know TCL scripting, at least a little.

See the NIOS wiki :http://nioswiki.jot.com/wikihome/systemconsole

There are some examples. All you have to do is to have an JTAG avalon master (i.e NIOS processor+debug module or the new Altera SOPC JTAG avalon master component) in your design. Then you have some basic TCL command which allows read/write accesses on the Avalon bus, at a user specified adress.

I personnally use the system console for programming in-system an MSP430 (see here (http://nioswiki.jot.com/wikihome/system%20console%20-%20msp430)) and a Xilinx CPLD on my custom board.

Great tool IMO.

Regards.