Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorDownload configuration and data to EPCS
Hi everybody i am using EP3C25U with EPCS16. I want too download FPGA configuration (with NIOS2) to EPCS through jtag. In addition to that i want to add some initial/setup data. The idea i...
Altera_ForumHonored Contributor
Honored ContributorYes, you can do that.
You just do the same things you would do with the NIOS firmware in that case, but put the "init data" at a different address (e.g. at the tail end of the EPCS logical address space).
