Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

DE2-70 and I2C

Dear Sir, If I want to design an I2C port on the FPGA, like DE2-70, do I need an I2C bus extender? How to add it onto the DE2-70? I've one example design from the I2C bus extender, P82B96 ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Hi all,

I'm working on the adxl345 on DE0-nano board for my university project,

and I have some problem with My nios program in eclipse IDE.

I've seen your post in the site about running this program.

If it is possible ,Please help me how can I run this core into my design if you have done it.

I'm using Quartus 11.1 and I will appreciating if you send me the programs.

when I run the program It does not even start the transmitting and I suspect my sw.tcl or one other file is corrupted by the changes that I did to those files, so

I will appreciating if you send to me the project files.

farshid_mfc[at]yahoo.com