Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

data type in the current state

i am trying to see my states in the waveform by their names as they are changing, so what i did , i changed the data type in the proparties bar in the waveform for the current state, i changed it to ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

then you cannot see the state names, because they have been removed and replaced with binary state encodings, because it is a post place and route test.

You will need to do an RTL simulation in modelsim (or similar) to see the state names