Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

CYCLONE III(EP3C120) Development Kit configuration from flash

Hi all, I have a qsys design which include a nios II processor. I want to load my .sof and .elf files to flash to configure FPGA from flash directly on power up. In the design I have added a c...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Yes, I know. In the nios 2 falsh programmer guide it is said that when you set the reset vector address to cfi flash, elf2flash command directly includes a boot copier into the flash.

I think my problem is not related to a problem like boot copier etc.

For that board with the qsys design I could not manage to program flash. For NEEK board of ALTERA with SOPC builder I could manage to program the flash before.

I think there should be a reference design including qsys and a cfi flash for that board,but I could not find anywhere.