Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Cyclone III not configuring, using AS.

I'm currently using Cyclone III (EP3C5F256C8) and I'm trying to configure it and it's not happening. I'm using AS connected to a FLASH chip (M25P16). nCONFIG, nSTATUS, CONF_DONE and INIT_DONE are pul...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

So, I nSTATUS once it goes high it never goes down indicating a configuration error (sorry I mixed up nCONFIG and nSTATUS in my first description of the problem). I actually tried to trigger the Logic analyzer on the falling edge of nSTATUS and it was not possible to do so.