Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

Cyclone III matching footprints

I am in the process of helping my board layout guy to plan a design for a Cyclone III board. My project director wants some flexibility in the logic block count for the FPGA, in case we get further ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

For a single board layout to support more than one device, select all devices in Quartus. Select one device the usual way. Then on the Device page of the Settings dialog box click the "Migration Devices" button to select the other device(s). Quartus will provide a pin-out that will work for all selected devices.

According to Quartus, EP3C80F484 is an available migration device for the EP3C55F484.