Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Cyclone III EP3C25F256

I have Cyclone III EP3C25F256 FPGA devices. What should I buy to program those?
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

You need to solder them on a PCB first. Then the Quartus software with an Altera USB blaster or clone (Terasic USB blaster, Entner EEBlaster) , should do the trick.