Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

Cyclone II programming problems

Hi all -- I've built a few PCBs based on Cyclone II FPGAs. Some of these boards, and especially the last, suffer from an annoying problem: When connecting the FPGA to the JTAG cable, Quart...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
18 years ago

It's interesting to hear that the problem can be cured by using a different Blaster. As I've said in other threads, my custom board was almost impossible to program with the Altera USB Blaster but is 100% reliable with the Terasic version. Maybe this could be an alternative cure.