Altera_Forum
Honored Contributor
Honored Contributorcyclone II fpga with 5v output
hello all In my design ,i want cyclone II fpga drive 5v system,how can i do it .Can i use 3.3v LVDS io standard? Thanks
Forum Discussion
Altera_ForumHonored Contributor
Honored ContributorYou need a level converter. Here is one way to do it:
http://ics.nxp.com/support/techtips/simpleshifter/ There are many other solutions: http://www.nxp.com/documents/application_note/an240.pdf
