Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

creating LEON 3 Processor on Altera De2 board

hello. i have altera de2 board cyclon ii fpga. can anybody guide me how i can use and create the leon 3 processor using the altera de2 board. reply must

3 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    Thanks for reply. Actually i visited the Aeroflex Gaisler website and they have open source leon 3 template for Cyclon ii but i cannot understand how i can use it. they give the netlist file. Please guide me how i can use that template and stay away from headache to write my own code.

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    13 years ago

    i had done configuring leon3 processor with the help of CENTOS 5.5 linux just open the library 'grlib-gpl-1.1.0-b4113' and then 'designs' and then 'leon3-altera-de2-ep2c35' right click and then click on 'open in terminal' and then giving a command on terminal 'make xconfig' and set ur specification their and ur leon3 will be configured.

    --- Quote Start ---

    Thanks for reply. Actually i visited the Aeroflex Gaisler website and they have open source leon 3 template for Cyclon ii but i cannot understand how i can use it. they give the netlist file. Please guide me how i can use that template and stay away from headache to write my own code.

    --- Quote End ---