Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

CPLD I/O's during power up

Hello everybody, I am using a Max II EPM570T100A5 CPLD; in our design the CPLD controls 4 MOSFET drivers for a fullbridge, thus it is critical that these outputs on the CPLD remain at GND dur...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Ok, yes that makes sense, thanks FvM, I will give both of those resistor values a try.

Cheers,

Eric