Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Copying code from EPCS to MRAM

Hello, I have a board with Stratix II and EPCS16. EPCS16 has plenty of space left over the configuration data for the FPGA (EP2S30). This space can probably be used for storing code for the em...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Yes. Point the Reset Address of your processor at the epcs_controller, all code sections at the MRAM, build your code, and program the EPCS (using the Nios II Flash Programmer).

That's it...