Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Configuring Cyclone devices using jrunner

Hi,

I tried to configure some Altera devices using the Altera jrunner and ByteblasterMV.

The old Flex is configured OK.

But it's not so with CycloneII.

Jrunner cannot configure EP2C5Q208 and EP2C5T144 - three standard attempts are made and then "Configuration not successful" is displayed.

If I use the Quartus programmer everything is OK.

Has anybody got a successful experience in configuration of Cyclone devices with the help of the jrunner and the byteblaster?

Regards,

tduty

1 Reply

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    Hi,

    I wish to define the state more exactly.

    During configuration with the help of jrunner (+ByteblasterMV+.cdf+.rbf) when CheckStatus function is fulfilled it returns 0 that is an error.

    Why is it so I cannot quess.

    Maybe anybody can explain it?

    Regards,

    tduty